BOHO BOOTS DIY

bohobootscu4 bohobootscu5 bohobootscu6 bohobootscu8 bohobootscu9 bohobootscu10 bohobootscu71 photo (4)

O que você precisa:
Um par de botas de cowboy velhas ou Segunda Mão (de preferência sem forro de tecido);
Vários cintos – geralmente dois cintos por bota;
Cola forte – 3M cola adesiva Força máxima funciona melhor ;
Fita, corrente quebrada, rendas, fitas, etc – qualquer coisa extra para embelezar suas botas se você deseja mais do que os cintos ;
Tesoura fortes ;
Bastões de cola de tecido e pistola de cola quente;
Fita adesiva – para prender cintos no lugar enquanto cola de secagem ;
Fazê-lo:
Cortar suas botas nas costas com sua tesoura. Pare na tampa de calcanhar e dobre ;
Planejar como você vai colocar os cintos e enfeites em torno de suas botas;
Uma vez que você tenha decidido sobre a colocação de seus cintos, comece colando…seja criativa!
Deixe secar e Voilááá!!! Sua bota boho feita por você.

English>
What You Need:
• a pair of old or thrifted cowboy boots (preferably with no fabric lining)
• various belts usually two belts per boot
• strong glue
• ribbon, broken chain, lace, ribbons, cotton t-shirt scraps, etc. – anything extra to embellish your boots if you desire more than the belts
• strong scissors
• hot glue gun
• masking tape – to hold belts in place while glue is drying
Do It:
1. cut your boots down the back with your scissors. stop at the heel cap and fold over
2. plan your belt arrangement by wrapping them around your boots – usually they will wrap around twice and then buckle. if you need to, punch a new hole or trim your belt to fit perfectly. *don’t cinch them too tight, you still have to be able to get your foot in!
3. once you’ve decided on the placement of your belts, start gluing! if you want to put some lace or fabric underneath the belts start with that and adhere with fabric glue sticks straight to your boot leather. don’t worry about the white color of the fabric glue because your belts will cover it.
4. fasten your belts using the 3M glue – coat a thin coat on the boot area and another thin coat on the belt area, wait about 1 minute, until the glue is tacky and press the two coated sides together. i used a plastic knife to apply the glue. repeat all the way around to adhere your belt to your boot and the belt to the belt where it criss-crosses or overlaps. use the masking tape in places to hold the belt in place until the glue dries, around 1 hour.
5. finish by gluing on some chain pieces, etc.
Voilá!! Your handmade boho boots!! ENJOYY!!